Interface Structure and Deformation Mechanisms of Mg/Nb Multilayers

Magnesium (Mg) and its alloys, as the lightest structural materials, are very attractive for a range of weight sensitive applications, such as aircraft engine, transportation industry and so on. However, their further applications are limited due to the weak properties, such as the low strength and poor ductility. In recent years, advanced techniques aiming at the modification of the microstructures, have been developed to promote the properties of Mg and its alloys, such as modifying the texture, refining the grain size, forming the intermetallic phase, and introducing the interfaces or stacking faults into the systems. Constructing Mg/Nb multilayers, which introduces a high density of interfaces into the system, is one of the most promising techniques to improve mechanical properties. The corresponding mechanism gives the direction for the improvement of this technique. In this study, a comprehensive literature review related to Mg/Nb multilayers is first summarized and studied. Then, the interface structures and the network of interfacial dislocations were determined by the atomically informed Frank-Bilby (AIFB) method. With Molecular Dynamics (MD) simulation, it has been found that Mg/Nb interfaces remain stable during deformation while {10-12} twinning is the dominant deformation mode in Mg layers when the Mg/Nb multilayer is subjected to compressive loading along [10-10] direction in Mg. Abnormally, {10-12} twinning is accomplished by BP transformation, which leads to considerable yield strength, high hardening rate, and significant back stress in nearby layers. All the factors explain the superior mechanical properties of Mg/Nb multilayers. Advisor: Jian Wan

Making Light-weight Mg-Metal Laminated Nanocomposites

Magnesium is the lightest of all the engineering metals. Replacing steel structural materials with Mg-based materials in automotive applications would boost fuel. However, conventional Mg alloys typically suffer from low strength and poor deformability due to very few slip systems and easy twinning. Alloying Mg with other materials and microstructural engineering are promising approaches to increase ductility and strength of Mg. According to Wang et al., interfaces with low energy and high coherency may effectively constrict the nucleation of twins in Mg. In this work, Mg-metal multilayered nanocomposites will be produced by melt spinning procedure and the layers’ mechanical properties will be examined by picoindentation. Meanwhile, plastic co-deformation of the layers can be designed by crystallographic theory and multiscale modelling to achieve fine nanolaminate microstructure in bulk Mg alloys

AutoFi: Towards Automatic WiFi Human Sensing via Geometric Self-Supervised Learning

WiFi sensing technology has shown superiority in smart homes among various sensors for its cost-effective and privacy-preserving merits. It is empowered by Channel State Information (CSI) extracted from WiFi signals and advanced machine learning models to analyze motion patterns in CSI. Many learning-based models have been proposed for kinds of applications, but they severely suffer from environmental dependency. Though domain adaptation methods have been proposed to tackle this issue, it is not practical to collect high-quality, well-segmented and balanced CSI samples in a new environment for adaptation algorithms, but randomly-captured CSI samples can be easily collected. {\color{black}In this paper, we firstly explore how to learn a robust model from these low-quality CSI samples, and propose AutoFi, an annotation-efficient WiFi sensing model based on a novel geometric self-supervised learning algorithm.} The AutoFi fully utilizes unlabeled low-quality CSI samples that are captured randomly, and then transfers the knowledge to specific tasks defined by users, which is the first work to achieve cross-task transfer in WiFi sensing. The AutoFi is implemented on a pair of Atheros WiFi APs for evaluation. The AutoFi transfers knowledge from randomly collected CSI samples into human gait recognition and achieves state-of-the-art performance. Furthermore, we simulate cross-task transfer using public datasets to further demonstrate its capacity for cross-task learning. For the UT-HAR and Widar datasets, the AutoFi achieves satisfactory results on activity recognition and gesture recognition without any prior training. We believe that the AutoFi takes a huge step toward automatic WiFi sensing without any developer engagement.Comment: The paper has been accepted by IEEE Internet of Things Journa

High throughput analysis of leaf chlorophyll content in sorghum using RGB, hyperspectral, and fluorescence imaging and sensor fusion

Leaf chlorophyll content plays an important role in indicating plant stresses and nutrient status. Traditional approaches for the quantification of chlorophyll content mainly include acetone ethanol extraction, spectrophotometry and high-performance liquid chromatography. Such destructive methods based on laboratory procedures are time consuming, expensive, and not suitable for high-throughput analysis. High throughput imaging techniques are now widely used for non-destructive analysis of plant phenotypic traits. In this study three imaging modules (RGB, hyperspectral, and fluorescence imaging) were, separately and in combination, used to estimate chlorophyll content of sorghum plants in a greenhouse environment. Color features, spectral indices, and chlorophyll fluorescence intensity were extracted from these three types of images, and multiple linear regression models and PLSR (partial least squares regression) models were built to predict leaf chlorophyll content (measured by a handheld leaf chlorophyll meter) from the image features. Results: The models with a single color feature from RGB images predicted chlorophyll content with R2 ranging from 0.67 to 0.88. The models using the three spectral indices extracted from hyperspectral images (Ration Vegetation Index, Normalized Difference Vegetation Index, and Modified Chlorophyll Absorption Ratio Index) predicted chlorophyll content with R2 ranging from 0.77 to 0.78. The model using the fluorescence intensity extracted from fluorescence images predicted chlorophyll content with R2 of 0.79. The PLSR model that involved all the image features extracted from the three different imaging modules exhibited the best performance for predicting chlorophyll content, with R2 of 0.90. It was also found that inclusion of SLW (Specific Leaf Weight) into the image-based models further improved the chlorophyll prediction accuracy. Conclusion: All three imaging modules (RGB, hyperspectral, and fluorescence) tested in our study alone could estimate chlorophyll content of sorghum plants reasonably well. Fusing image features from different imaging modules with PLSR modeling significantly improved the predictive performance. Image-based phenotyping could provide a rapid and non-destructive approach for estimating chlorophyll content in sorghum

High throughput analysis of leaf chlorophyll content in sorghum using RGB, hyperspectral, and fluorescence imaging and sensor fusion

Background: Leaf chlorophyll content plays an important role in indicating plant stresses and nutrient status. Traditional approaches for the quantification of chlorophyll content mainly include acetone ethanol extraction, spectrophotometry and high-performance liquid chromatography. Such destructive methods based on laboratory procedures are time consuming, expensive, and not suitable for high-throughput analysis. High throughput imaging techniques are now widely used for non-destructive analysis of plant phenotypic traits. In this study three imaging modules (RGB, hyperspectral, and fluorescence imaging) were, separately and in combination, used to estimate chlorophyll content of sorghum plants in a greenhouse environment. Color features, spectral indices, and chlorophyll fluorescence intensity were extracted from these three types of images, and multiple linear regression models and PLSR (partial least squares regression) models were built to predict leaf chlorophyll content (measured by a handheld leaf chlorophyll meter) from the image features. Results: The models with a single color feature from RGB images predicted chlorophyll content with R2 ranging from 0.67 to 0.88. The models using the three spectral indices extracted from hyperspectral images (Ration Vegetation Index, Normalized Difference Vegetation Index, and Modified Chlorophyll Absorption Ratio Index) predicted chlorophyll content with R2 ranging from 0.77 to 0.78. The model using the fluorescence intensity extracted from fluorescence images predicted chlorophyll content with R2 of 0.79. The PLSR model that involved all the image features extracted from the three different imaging modules exhibited the best performance for predicting chlorophyll content, with R2 of 0.90. It was also found that inclusion of SLW (Specific Leaf Weight) into the image-based models further improved the chlorophyll prediction accuracy. Conclusion: All three imaging modules (RGB, hyperspectral, and fluorescence) tested in our study alone could estimate chlorophyll content of sorghum plants reasonably well. Fusing image features from different imaging modules with PLSR modeling significantly improved the predictive performance. Image-based phenotyping could provide a rapid and non-destructive approach for estimating chlorophyll content in sorghum

SenseFi: A library and benchmark on deep-learning-empowered WiFi human sensing

Over the recent years, WiFi sensing has been rapidly developed for privacy-preserving, ubiquitous human-sensing applications, enabled by signal processing and deep-learning methods. However, a comprehensive public benchmark for deep learning in WiFi sensing, similar to that available for visual recognition, does not yet exist. In this article, we review recent progress in topics ranging from WiFi hardware platforms to sensing algorithms and propose a new library with a comprehensive benchmark, SenseFi. On this basis, we evaluate various deep-learning models in terms of distinct sensing tasks, WiFi platforms, recognition accuracy, model size, computational complexity, and feature transferability. Extensive experiments are performed whose results provide valuable insights into model design, learning strategy, and training techniques for real-world applications. In summary, SenseFi is a comprehensive benchmark with an open-source library for deep learning in WiFi sensing research that offers researchers a convenient tool to validate learning-based WiFi-sensing methods on multiple datasets and platforms.Nanyang Technological UniversityPublished versionThis research is supported by NTU Presidential Postdoctoral Fellowship, ‘‘Adaptive Multi-modal Learning for Robust Sensing and Recognition in Smart Cities’’ project fund (020977-00001), at the Nanyang Technological University, Singapore

MM-Fi: Multi-Modal Non-Intrusive 4D Human Dataset for Versatile Wireless Sensing

4D human perception plays an essential role in a myriad of applications, such as home automation and metaverse avatar simulation. However, existing solutions which mainly rely on cameras and wearable devices are either privacy intrusive or inconvenient to use. To address these issues, wireless sensing has emerged as a promising alternative, leveraging LiDAR, mmWave radar, and WiFi signals for device-free human sensing. In this paper, we propose MM-Fi, the first multi-modal non-intrusive 4D human dataset with 27 daily or rehabilitation action categories, to bridge the gap between wireless sensing and high-level human perception tasks. MM-Fi consists of over 320k synchronized frames of five modalities from 40 human subjects. Various annotations are provided to support potential sensing tasks, e.g., human pose estimation and action recognition. Extensive experiments have been conducted to compare the sensing capacity of each or several modalities in terms of multiple tasks. We envision that MM-Fi can contribute to wireless sensing research with respect to action recognition, human pose estimation, multi-modal learning, cross-modal supervision, and interdisciplinary healthcare research.Comment: The paper has been accepted by NeurIPS 2023 Datasets and Benchmarks Track. Project page: https://ntu-aiot-lab.github.io/mm-f